Skip to content
World Beam Solution
EUV Source

PRODUCT

EUV Source

Electron-beam-excited EUV light source

A light source that produces extreme ultraviolet (EUV) light by exciting a target with an electron beam from a CNT cold cathode. We are developing it for research and metrology equipment in semiconductor processing.

Key features

  • EUV generation by electron beam excitation
  • Compact, low-heat design with a cold cathode
  • Under development for research and metrology tools

Details

Extreme ultraviolet light from an electron beam

Extreme ultraviolet light from an electron beam

A cold-cathode electron beam strikes a target to generate extreme ultraviolet light. With a simpler structure than laser or plasma sources, it can be made small enough for laboratories and metrology equipment.

A compact, clean light source

The source module measures 240 × 136 × 130 mm. Unlike existing EUV inspection tools that span 2 to 3 m, it can be built directly into measurement equipment.

Because it is excited by a cold-cathode electron beam, it produces none of the debris generated by laser or plasma sources.

10 hours of continuous operation, about 1% output variation

10 hours of continuous operation, about 1% output variation

Over 10 hours of continuous operation, the EUV photocurrent averaged 116.6 nA with a standard deviation of 1.6 nA (1.37% variation).

13.5 nm spectrum

13.5 nm spectrum

After two reflections on multilayer mirrors, the FWHM of the 13.5 nm peak narrows to 0.31 nm and the share of light within ±1% of 13.5 nm rises to 65%.

Transmittance, reflectance and flare measurement

Transmittance, reflectance and flare measurement

With the source and the measurement stage in one chamber, we measure the transmittance, reflectance and flare of EUV components. We measured the thickness-dependent transmittance of CNT pellicles, the next-generation protective film for EUV masks, within ±1% error and published the results in IEEE Transactions on Electron Devices.